top of page

OrniTrack-R19 or -R22 or -R24 - leg-mount solar powered GPS-GSM tracker for cranes


This leg-mount transmitter is designed for cranes to be attached on tibia.


Key characteristics:

  • Housing: leg-mount for cranes, strong and waterproof, can be made in one of four available colours: white, grey, black or brown

  • No external antennas

  • Size of -R19: dimensions 57×44×32 mm, inner diameter 19mm, weight ~41 g

  • GPS receiver: high sensitivity 99 channel module

  • GSM transceiver: 3G hexaband 800/850/900/1800/1900/2100 or 4G LTE-M or 4G LTE-Cat1

  • Internal battery: Lithium-Polymer with under- and over-charge protection

  • Fully charged battery is sufficient for logging 1,000 positions without additional recharge (under optimal GPS satellite view and not exceeding 20 GPRS data upload sessions in good network coverage)

  • Solar charger: 3 high efficiency (22%) solar panels

  • GPS logging intervals: from 1 second to 48 hours

  • Data storage: 128 MB capable of storing nearly 2,000,000 records

  • Data upload: via GSM/3G/4G network

  • GSM connection interval: from 10 minutes to 192 hours

  • SMS message with 10 GPS positions when GSM network is not available

  • Logged data are stored in memory if GSM network is unavailable

  • Geofences: 2 zones with separate sets of parameters. Zones defined by user by multiple rectangles (up to 10 per zone)

  • High frequency (up to 50 Hz) sensor (accelerometer, magnetometer, temperature, light intensity) data collection on a separate schedule

  • Day & night sensing

  • Operational temperature: from -20 to +60 °C

  • Control: user remotely controls GPS & GSM schedules, night-time GPS hibernation and geofence settings via online control panel

  • Main data record: UTC date & time, GPS position, GPS altitude, speed, direction, HDOP, battery voltage, battery charging current, instant acceleration (3 axes), temperature, magnetic field strength (3 axes)

  • Transmitter firmware update over the air (OTA)

bottom of page